MORTAR COLOUR
(BROWN)

REQUIREMENT:

Brown mortar colour for all external brickwork mortar and for internal feature walls.

PRODUCT TO USE:

Cementaid MORTABROWN

HOW TO SPECIFY:

All mortar (state areas) shall be made brown coloured by the addition of Cementaid MORTABROWN at a rate of not less than 2 litres for each 40Kg bag of cement used in the mix. No lime shall be used in coloured mortar.


EFFECTS:

Produces a dense, BROWN mortar for masonry, renders, toppings, etc. MORTABROWN contains ingredients which greatly reduce efflorescence on bricks and mortar. As with all mortar colours the mortar must be struck back from the brick face or rodded hard to bring cement to surface.

WHERE RECOMMENDED:

All masonry construction where a coloured mortar effect is desired. MORTABROWN is suitable for colouring screeds, renders, toppings and concrete at the above dose rate.


PACKAGING:

205 Litre, 20 Litre, 5 Litre, 1 Litre

NOTE:

STIR WELL BEFORE USE

Not to be used as a brown damp course. When exposed to UV light & weathering (e.g. exterior), the coloured effect produced by Cementaid MORTARBROWN is subject to fading over time. To minimise UV exposure, coloured mortars should be struck back from the brick surface and/or rodded hard to bring cement to the surface.